Hello

I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
any opportunity to run rygel on a server without the x windows system
for example on ubuntu server?

Robin

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)

Hello

I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
any opportunity to run rygel on a server without the x windows system
for example on ubuntu server?

Robin

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/13 Robin Bühler <>:
> Hello

Hi,

> I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
> any opportunity to run rygel on a server without the x windows system
> for example on ubuntu server?

Of course, its very much possible.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

Hello

I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
any opportunity to run rygel on a server without the x windows system
for example on ubuntu server?

Robin

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/13 Robin Bühler <>:
> Hello

Hi,

> I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
> any opportunity to run rygel on a server without the x windows system
> for example on ubuntu server?

Of course, its very much possible.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

2011/6/13 Robin Bühler <>:
> Hi,

Hello,

> That sounds good. I builded rygel 0.10.2 from the tarball and it works
> good on my devices.

Glad to hear.

> There are some messages on the prompt. Can I ignore them?
>
> (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> `G_IS_OBJECT (object)' failed

These ones don't seem like something ignorable. Is it possible to
get a gdb backtrace of that? Make sure to run rygel as:

G_DEBUG=fatal-criticals gdb rygel

and then gdb will treat those warnings like a crash.

> (rygel:1633): Rygel-CRITICAL **: file rygel-dbus-service.c: line 185:
> uncaught error: Error spawning command line `dbus-launch
> --autolaunch=8d2e626f53e17390c1f4564c000005a2 --binary-syntax
> --close-stderr': Failed to execute child process "dbus-launch" (No such
> file or directory) (g-exec-error-quark, 8)

This and other dbus ones can be ignored. You can get rid of most of
them by disable/removing the 'external' and 'mpris' plugins.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124

P.S Please keep rygel mailing-list in CC.
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

Hello

I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
any opportunity to run rygel on a server without the x windows system
for example on ubuntu server?

Robin

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/13 Robin Bühler <>:
> Hello

Hi,

> I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
> any opportunity to run rygel on a server without the x windows system
> for example on ubuntu server?

Of course, its very much possible.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

2011/6/13 Robin Bühler <>:
> Hi,

Hello,

> That sounds good. I builded rygel 0.10.2 from the tarball and it works
> good on my devices.

Glad to hear.

> There are some messages on the prompt. Can I ignore them?
>
> (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> `G_IS_OBJECT (object)' failed

These ones don't seem like something ignorable. Is it possible to
get a gdb backtrace of that? Make sure to run rygel as:

G_DEBUG=fatal-criticals gdb rygel

and then gdb will treat those warnings like a crash.

> (rygel:1633): Rygel-CRITICAL **: file rygel-dbus-service.c: line 185:
> uncaught error: Error spawning command line `dbus-launch
> --autolaunch=8d2e626f53e17390c1f4564c000005a2 --binary-syntax
> --close-stderr': Failed to execute child process "dbus-launch" (No such
> file or directory) (g-exec-error-quark, 8)

This and other dbus ones can be ignored. You can get rid of most of
them by disable/removing the 'external' and 'mpris' plugins.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124

P.S Please keep rygel mailing-list in CC.
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list


> > There are some messages on the prompt. Can I ignore them?
> >
> > (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> > `G_IS_OBJECT (object)' failed
>
> These ones don't seem like something ignorable. Is it possible to
> get a gdb backtrace of that? Make sure to run rygel as:
>
> G_DEBUG=fatal-criticals gdb rygel
>
> and then gdb will treat those warnings like a crash.

I hope i've done it right.


## 20110613 2341 | G_DEBUG=fatal-criticals gdb rygel ##
GNU gdb (GDB) 7.2-debian
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later

This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show
copying"
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu".
For bug reporting instructions, please see:
...
Reading symbols from /usr/local/bin/rygel...done.
(gdb) r
Starting program: /usr/local/bin/rygel
[Thread debugging using libthread_db enabled]
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
configuration from file '/usr/local/etc/rygel.conf'
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:129: Loaded user
configuration from file '/root/.config/rygel.conf'
[New Thread 0xb75e1b70 (LWP 2335)]

Program received signal SIGABRT, Aborted.
0xb7fe2416 in __kernel_vsyscall ()
(gdb) thread apply all backtrace full

Thread 2 (Thread 0xb75e1b70 (LWP 2335)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb7922f06 in poll () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7a2af5b in g_poll () from /lib/libglib-2.0.so.0
No symbol table info available.
#3 0xb7a1a96f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a1b0f3 in g_main_loop_run () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7bc6274 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#6 0xb7a43b6f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#7 0xb79c3c39 in start_thread () from /lib/i686/cmov/libpthread.so.0
No symbol table info available.
#8 0xb79308ee in clone () from /lib/i686/cmov/libc.so.6
No symbol table info available.

Thread 1 (Thread 0xb77b2750 (LWP 2332)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb788e8f1 in raise () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7891d22 in abort () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#3 0xb7a235e8 in g_logv () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a23622 in g_log () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7a2381d in g_return_if_fail_warning () from /lib/libglib-2.0.so.0
No symbol table info available.
#6 0xb7ad1ea2 in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#7 0xb7bc3bc3 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#8 0xb7ad200c in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#9 0xb7b5a172 in g_initable_new_valist () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#10 0xb7b5a1b9 in g_initable_new () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#11 0x0809a559 in rygel_dbus_service_construct (object_type=135932928,
main=0x80cb2c0,
error=0xbffffc88) at rygel-dbus-service.c:177
self = 0x8167238
_tmp0_ = 0xbffffc0c
_tmp1_ = 0x0
bus =
_tmp2_ =
_tmp3_ =
_inner_error_ = 0x81a2fa0
__PRETTY_FUNCTION__ = "rygel_dbus_service_construct"
#12 0x0809ab20 in rygel_dbus_service_new (main=0x80cb2c0,
error=0xbffffc88)
at rygel-dbus-service.c:254
No locals.
#13 0x0805a91c in rygel_main_main (argc=1, argv=0xbffffd54) at
rygel-main.c:920
result = 0
main =
_tmp2_ =
exit_code =
_tmp1_ = 0xbffffd54
original_args_length1 = 1
_inner_error_ = 0x0
original_args = 0x80c5f68
_tmp5_ =
_tmp0_ = 0x80c5f68
_tmp4_ = 0x0
_original_args_size_ = 1
#14 main (argc=1, argv=0xbffffd54) at rygel-main.c:993
No locals.
(gdb) c
Continuing.
[Thread 0xb75e1b70 (LWP 2335) exited]

Program terminated with signal SIGABRT, Aborted.
The program no longer exists.
(gdb) q


_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)

Hello

I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
any opportunity to run rygel on a server without the x windows system
for example on ubuntu server?

Robin

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/13 Robin Bühler <>:
> Hello

Hi,

> I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
> any opportunity to run rygel on a server without the x windows system
> for example on ubuntu server?

Of course, its very much possible.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

2011/6/13 Robin Bühler <>:
> Hi,

Hello,

> That sounds good. I builded rygel 0.10.2 from the tarball and it works
> good on my devices.

Glad to hear.

> There are some messages on the prompt. Can I ignore them?
>
> (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> `G_IS_OBJECT (object)' failed

These ones don't seem like something ignorable. Is it possible to
get a gdb backtrace of that? Make sure to run rygel as:

G_DEBUG=fatal-criticals gdb rygel

and then gdb will treat those warnings like a crash.

> (rygel:1633): Rygel-CRITICAL **: file rygel-dbus-service.c: line 185:
> uncaught error: Error spawning command line `dbus-launch
> --autolaunch=8d2e626f53e17390c1f4564c000005a2 --binary-syntax
> --close-stderr': Failed to execute child process "dbus-launch" (No such
> file or directory) (g-exec-error-quark, 8)

This and other dbus ones can be ignored. You can get rid of most of
them by disable/removing the 'external' and 'mpris' plugins.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124

P.S Please keep rygel mailing-list in CC.
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list


> > There are some messages on the prompt. Can I ignore them?
> >
> > (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> > `G_IS_OBJECT (object)' failed
>
> These ones don't seem like something ignorable. Is it possible to
> get a gdb backtrace of that? Make sure to run rygel as:
>
> G_DEBUG=fatal-criticals gdb rygel
>
> and then gdb will treat those warnings like a crash.

I hope i've done it right.


## 20110613 2341 | G_DEBUG=fatal-criticals gdb rygel ##
GNU gdb (GDB) 7.2-debian
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later

This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show
copying"
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu".
For bug reporting instructions, please see:
...
Reading symbols from /usr/local/bin/rygel...done.
(gdb) r
Starting program: /usr/local/bin/rygel
[Thread debugging using libthread_db enabled]
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
configuration from file '/usr/local/etc/rygel.conf'
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:129: Loaded user
configuration from file '/root/.config/rygel.conf'
[New Thread 0xb75e1b70 (LWP 2335)]

Program received signal SIGABRT, Aborted.
0xb7fe2416 in __kernel_vsyscall ()
(gdb) thread apply all backtrace full

Thread 2 (Thread 0xb75e1b70 (LWP 2335)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb7922f06 in poll () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7a2af5b in g_poll () from /lib/libglib-2.0.so.0
No symbol table info available.
#3 0xb7a1a96f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a1b0f3 in g_main_loop_run () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7bc6274 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#6 0xb7a43b6f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#7 0xb79c3c39 in start_thread () from /lib/i686/cmov/libpthread.so.0
No symbol table info available.
#8 0xb79308ee in clone () from /lib/i686/cmov/libc.so.6
No symbol table info available.

Thread 1 (Thread 0xb77b2750 (LWP 2332)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb788e8f1 in raise () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7891d22 in abort () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#3 0xb7a235e8 in g_logv () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a23622 in g_log () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7a2381d in g_return_if_fail_warning () from /lib/libglib-2.0.so.0
No symbol table info available.
#6 0xb7ad1ea2 in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#7 0xb7bc3bc3 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#8 0xb7ad200c in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#9 0xb7b5a172 in g_initable_new_valist () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#10 0xb7b5a1b9 in g_initable_new () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#11 0x0809a559 in rygel_dbus_service_construct (object_type=135932928,
main=0x80cb2c0,
error=0xbffffc88) at rygel-dbus-service.c:177
self = 0x8167238
_tmp0_ = 0xbffffc0c
_tmp1_ = 0x0
bus =
_tmp2_ =
_tmp3_ =
_inner_error_ = 0x81a2fa0
__PRETTY_FUNCTION__ = "rygel_dbus_service_construct"
#12 0x0809ab20 in rygel_dbus_service_new (main=0x80cb2c0,
error=0xbffffc88)
at rygel-dbus-service.c:254
No locals.
#13 0x0805a91c in rygel_main_main (argc=1, argv=0xbffffd54) at
rygel-main.c:920
result = 0
main =
_tmp2_ =
exit_code =
_tmp1_ = 0xbffffd54
original_args_length1 = 1
_inner_error_ = 0x0
original_args = 0x80c5f68
_tmp5_ =
_tmp0_ = 0x80c5f68
_tmp4_ = 0x0
_original_args_size_ = 1
#14 main (argc=1, argv=0xbffffd54) at rygel-main.c:993
No locals.
(gdb) c
Continuing.
[Thread 0xb75e1b70 (LWP 2335) exited]

Program terminated with signal SIGABRT, Aborted.
The program no longer exists.
(gdb) q


_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/14 Robin Bühler <>:
> I hope i've done it right.

Yes, you did! Thanks so much. Seems like we are not *gracefully*
handling inexistance of session bus. :( If its not too much to ask,
could you please file a bug about this, so that we don't easily forget
about this?

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

Hello

I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
any opportunity to run rygel on a server without the x windows system
for example on ubuntu server?

Robin

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/13 Robin Bühler <>:
> Hello

Hi,

> I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
> any opportunity to run rygel on a server without the x windows system
> for example on ubuntu server?

Of course, its very much possible.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

2011/6/13 Robin Bühler <>:
> Hi,

Hello,

> That sounds good. I builded rygel 0.10.2 from the tarball and it works
> good on my devices.

Glad to hear.

> There are some messages on the prompt. Can I ignore them?
>
> (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> `G_IS_OBJECT (object)' failed

These ones don't seem like something ignorable. Is it possible to
get a gdb backtrace of that? Make sure to run rygel as:

G_DEBUG=fatal-criticals gdb rygel

and then gdb will treat those warnings like a crash.

> (rygel:1633): Rygel-CRITICAL **: file rygel-dbus-service.c: line 185:
> uncaught error: Error spawning command line `dbus-launch
> --autolaunch=8d2e626f53e17390c1f4564c000005a2 --binary-syntax
> --close-stderr': Failed to execute child process "dbus-launch" (No such
> file or directory) (g-exec-error-quark, 8)

This and other dbus ones can be ignored. You can get rid of most of
them by disable/removing the 'external' and 'mpris' plugins.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124

P.S Please keep rygel mailing-list in CC.
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list


> > There are some messages on the prompt. Can I ignore them?
> >
> > (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> > `G_IS_OBJECT (object)' failed
>
> These ones don't seem like something ignorable. Is it possible to
> get a gdb backtrace of that? Make sure to run rygel as:
>
> G_DEBUG=fatal-criticals gdb rygel
>
> and then gdb will treat those warnings like a crash.

I hope i've done it right.


## 20110613 2341 | G_DEBUG=fatal-criticals gdb rygel ##
GNU gdb (GDB) 7.2-debian
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later

This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show
copying"
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu".
For bug reporting instructions, please see:
...
Reading symbols from /usr/local/bin/rygel...done.
(gdb) r
Starting program: /usr/local/bin/rygel
[Thread debugging using libthread_db enabled]
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
configuration from file '/usr/local/etc/rygel.conf'
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:129: Loaded user
configuration from file '/root/.config/rygel.conf'
[New Thread 0xb75e1b70 (LWP 2335)]

Program received signal SIGABRT, Aborted.
0xb7fe2416 in __kernel_vsyscall ()
(gdb) thread apply all backtrace full

Thread 2 (Thread 0xb75e1b70 (LWP 2335)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb7922f06 in poll () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7a2af5b in g_poll () from /lib/libglib-2.0.so.0
No symbol table info available.
#3 0xb7a1a96f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a1b0f3 in g_main_loop_run () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7bc6274 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#6 0xb7a43b6f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#7 0xb79c3c39 in start_thread () from /lib/i686/cmov/libpthread.so.0
No symbol table info available.
#8 0xb79308ee in clone () from /lib/i686/cmov/libc.so.6
No symbol table info available.

Thread 1 (Thread 0xb77b2750 (LWP 2332)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb788e8f1 in raise () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7891d22 in abort () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#3 0xb7a235e8 in g_logv () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a23622 in g_log () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7a2381d in g_return_if_fail_warning () from /lib/libglib-2.0.so.0
No symbol table info available.
#6 0xb7ad1ea2 in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#7 0xb7bc3bc3 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#8 0xb7ad200c in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#9 0xb7b5a172 in g_initable_new_valist () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#10 0xb7b5a1b9 in g_initable_new () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#11 0x0809a559 in rygel_dbus_service_construct (object_type=135932928,
main=0x80cb2c0,
error=0xbffffc88) at rygel-dbus-service.c:177
self = 0x8167238
_tmp0_ = 0xbffffc0c
_tmp1_ = 0x0
bus =
_tmp2_ =
_tmp3_ =
_inner_error_ = 0x81a2fa0
__PRETTY_FUNCTION__ = "rygel_dbus_service_construct"
#12 0x0809ab20 in rygel_dbus_service_new (main=0x80cb2c0,
error=0xbffffc88)
at rygel-dbus-service.c:254
No locals.
#13 0x0805a91c in rygel_main_main (argc=1, argv=0xbffffd54) at
rygel-main.c:920
result = 0
main =
_tmp2_ =
exit_code =
_tmp1_ = 0xbffffd54
original_args_length1 = 1
_inner_error_ = 0x0
original_args = 0x80c5f68
_tmp5_ =
_tmp0_ = 0x80c5f68
_tmp4_ = 0x0
_original_args_size_ = 1
#14 main (argc=1, argv=0xbffffd54) at rygel-main.c:993
No locals.
(gdb) c
Continuing.
[Thread 0xb75e1b70 (LWP 2335) exited]

Program terminated with signal SIGABRT, Aborted.
The program no longer exists.
(gdb) q


_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/14 Robin Bühler <>:
> I hope i've done it right.

Yes, you did! Thanks so much. Seems like we are not *gracefully*
handling inexistance of session bus. :( If its not too much to ask,
could you please file a bug about this, so that we don't easily forget
about this?

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

> If its not too much to ask,
> could you please file a bug about this, so that we don't easily forget
> about this?

absolutely not :-)

https://bugzilla.gnome.org/show_bug.cgi?id=652678



_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)

Hello

I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
any opportunity to run rygel on a server without the x windows system
for example on ubuntu server?

Robin

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/13 Robin Bühler <>:
> Hello

Hi,

> I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
> any opportunity to run rygel on a server without the x windows system
> for example on ubuntu server?

Of course, its very much possible.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

2011/6/13 Robin Bühler <>:
> Hi,

Hello,

> That sounds good. I builded rygel 0.10.2 from the tarball and it works
> good on my devices.

Glad to hear.

> There are some messages on the prompt. Can I ignore them?
>
> (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> `G_IS_OBJECT (object)' failed

These ones don't seem like something ignorable. Is it possible to
get a gdb backtrace of that? Make sure to run rygel as:

G_DEBUG=fatal-criticals gdb rygel

and then gdb will treat those warnings like a crash.

> (rygel:1633): Rygel-CRITICAL **: file rygel-dbus-service.c: line 185:
> uncaught error: Error spawning command line `dbus-launch
> --autolaunch=8d2e626f53e17390c1f4564c000005a2 --binary-syntax
> --close-stderr': Failed to execute child process "dbus-launch" (No such
> file or directory) (g-exec-error-quark, 8)

This and other dbus ones can be ignored. You can get rid of most of
them by disable/removing the 'external' and 'mpris' plugins.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124

P.S Please keep rygel mailing-list in CC.
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list


> > There are some messages on the prompt. Can I ignore them?
> >
> > (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> > `G_IS_OBJECT (object)' failed
>
> These ones don't seem like something ignorable. Is it possible to
> get a gdb backtrace of that? Make sure to run rygel as:
>
> G_DEBUG=fatal-criticals gdb rygel
>
> and then gdb will treat those warnings like a crash.

I hope i've done it right.


## 20110613 2341 | G_DEBUG=fatal-criticals gdb rygel ##
GNU gdb (GDB) 7.2-debian
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later

This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show
copying"
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu".
For bug reporting instructions, please see:
...
Reading symbols from /usr/local/bin/rygel...done.
(gdb) r
Starting program: /usr/local/bin/rygel
[Thread debugging using libthread_db enabled]
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
configuration from file '/usr/local/etc/rygel.conf'
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:129: Loaded user
configuration from file '/root/.config/rygel.conf'
[New Thread 0xb75e1b70 (LWP 2335)]

Program received signal SIGABRT, Aborted.
0xb7fe2416 in __kernel_vsyscall ()
(gdb) thread apply all backtrace full

Thread 2 (Thread 0xb75e1b70 (LWP 2335)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb7922f06 in poll () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7a2af5b in g_poll () from /lib/libglib-2.0.so.0
No symbol table info available.
#3 0xb7a1a96f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a1b0f3 in g_main_loop_run () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7bc6274 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#6 0xb7a43b6f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#7 0xb79c3c39 in start_thread () from /lib/i686/cmov/libpthread.so.0
No symbol table info available.
#8 0xb79308ee in clone () from /lib/i686/cmov/libc.so.6
No symbol table info available.

Thread 1 (Thread 0xb77b2750 (LWP 2332)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb788e8f1 in raise () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7891d22 in abort () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#3 0xb7a235e8 in g_logv () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a23622 in g_log () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7a2381d in g_return_if_fail_warning () from /lib/libglib-2.0.so.0
No symbol table info available.
#6 0xb7ad1ea2 in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#7 0xb7bc3bc3 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#8 0xb7ad200c in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#9 0xb7b5a172 in g_initable_new_valist () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#10 0xb7b5a1b9 in g_initable_new () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#11 0x0809a559 in rygel_dbus_service_construct (object_type=135932928,
main=0x80cb2c0,
error=0xbffffc88) at rygel-dbus-service.c:177
self = 0x8167238
_tmp0_ = 0xbffffc0c
_tmp1_ = 0x0
bus =
_tmp2_ =
_tmp3_ =
_inner_error_ = 0x81a2fa0
__PRETTY_FUNCTION__ = "rygel_dbus_service_construct"
#12 0x0809ab20 in rygel_dbus_service_new (main=0x80cb2c0,
error=0xbffffc88)
at rygel-dbus-service.c:254
No locals.
#13 0x0805a91c in rygel_main_main (argc=1, argv=0xbffffd54) at
rygel-main.c:920
result = 0
main =
_tmp2_ =
exit_code =
_tmp1_ = 0xbffffd54
original_args_length1 = 1
_inner_error_ = 0x0
original_args = 0x80c5f68
_tmp5_ =
_tmp0_ = 0x80c5f68
_tmp4_ = 0x0
_original_args_size_ = 1
#14 main (argc=1, argv=0xbffffd54) at rygel-main.c:993
No locals.
(gdb) c
Continuing.
[Thread 0xb75e1b70 (LWP 2335) exited]

Program terminated with signal SIGABRT, Aborted.
The program no longer exists.
(gdb) q


_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/14 Robin Bühler <>:
> I hope i've done it right.

Yes, you did! Thanks so much. Seems like we are not *gracefully*
handling inexistance of session bus. :( If its not too much to ask,
could you please file a bug about this, so that we don't easily forget
about this?

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

> If its not too much to ask,
> could you please file a bug about this, so that we don't easily forget
> about this?

absolutely not :-)

https://bugzilla.gnome.org/show_bug.cgi?id=652678



_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/15 Robin Bühler <>:
>> If its not too much to ask,
>> could you please file a bug about this, so that we don't easily forget
>> about this?
>
> absolutely not :-)
>
> https://bugzilla.gnome.org/show_bug.cgi?id=652678

Thanks so much! I'll try to get some time to fix it soon'ish.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

Hello

I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
any opportunity to run rygel on a server without the x windows system
for example on ubuntu server?

Robin

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/13 Robin Bühler <>:
> Hello

Hi,

> I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
> any opportunity to run rygel on a server without the x windows system
> for example on ubuntu server?

Of course, its very much possible.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

2011/6/13 Robin Bühler <>:
> Hi,

Hello,

> That sounds good. I builded rygel 0.10.2 from the tarball and it works
> good on my devices.

Glad to hear.

> There are some messages on the prompt. Can I ignore them?
>
> (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> `G_IS_OBJECT (object)' failed

These ones don't seem like something ignorable. Is it possible to
get a gdb backtrace of that? Make sure to run rygel as:

G_DEBUG=fatal-criticals gdb rygel

and then gdb will treat those warnings like a crash.

> (rygel:1633): Rygel-CRITICAL **: file rygel-dbus-service.c: line 185:
> uncaught error: Error spawning command line `dbus-launch
> --autolaunch=8d2e626f53e17390c1f4564c000005a2 --binary-syntax
> --close-stderr': Failed to execute child process "dbus-launch" (No such
> file or directory) (g-exec-error-quark, 8)

This and other dbus ones can be ignored. You can get rid of most of
them by disable/removing the 'external' and 'mpris' plugins.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124

P.S Please keep rygel mailing-list in CC.
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list


> > There are some messages on the prompt. Can I ignore them?
> >
> > (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> > `G_IS_OBJECT (object)' failed
>
> These ones don't seem like something ignorable. Is it possible to
> get a gdb backtrace of that? Make sure to run rygel as:
>
> G_DEBUG=fatal-criticals gdb rygel
>
> and then gdb will treat those warnings like a crash.

I hope i've done it right.


## 20110613 2341 | G_DEBUG=fatal-criticals gdb rygel ##
GNU gdb (GDB) 7.2-debian
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later

This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show
copying"
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu".
For bug reporting instructions, please see:
...
Reading symbols from /usr/local/bin/rygel...done.
(gdb) r
Starting program: /usr/local/bin/rygel
[Thread debugging using libthread_db enabled]
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
configuration from file '/usr/local/etc/rygel.conf'
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:129: Loaded user
configuration from file '/root/.config/rygel.conf'
[New Thread 0xb75e1b70 (LWP 2335)]

Program received signal SIGABRT, Aborted.
0xb7fe2416 in __kernel_vsyscall ()
(gdb) thread apply all backtrace full

Thread 2 (Thread 0xb75e1b70 (LWP 2335)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb7922f06 in poll () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7a2af5b in g_poll () from /lib/libglib-2.0.so.0
No symbol table info available.
#3 0xb7a1a96f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a1b0f3 in g_main_loop_run () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7bc6274 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#6 0xb7a43b6f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#7 0xb79c3c39 in start_thread () from /lib/i686/cmov/libpthread.so.0
No symbol table info available.
#8 0xb79308ee in clone () from /lib/i686/cmov/libc.so.6
No symbol table info available.

Thread 1 (Thread 0xb77b2750 (LWP 2332)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb788e8f1 in raise () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7891d22 in abort () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#3 0xb7a235e8 in g_logv () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a23622 in g_log () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7a2381d in g_return_if_fail_warning () from /lib/libglib-2.0.so.0
No symbol table info available.
#6 0xb7ad1ea2 in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#7 0xb7bc3bc3 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#8 0xb7ad200c in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#9 0xb7b5a172 in g_initable_new_valist () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#10 0xb7b5a1b9 in g_initable_new () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#11 0x0809a559 in rygel_dbus_service_construct (object_type=135932928,
main=0x80cb2c0,
error=0xbffffc88) at rygel-dbus-service.c:177
self = 0x8167238
_tmp0_ = 0xbffffc0c
_tmp1_ = 0x0
bus =
_tmp2_ =
_tmp3_ =
_inner_error_ = 0x81a2fa0
__PRETTY_FUNCTION__ = "rygel_dbus_service_construct"
#12 0x0809ab20 in rygel_dbus_service_new (main=0x80cb2c0,
error=0xbffffc88)
at rygel-dbus-service.c:254
No locals.
#13 0x0805a91c in rygel_main_main (argc=1, argv=0xbffffd54) at
rygel-main.c:920
result = 0
main =
_tmp2_ =
exit_code =
_tmp1_ = 0xbffffd54
original_args_length1 = 1
_inner_error_ = 0x0
original_args = 0x80c5f68
_tmp5_ =
_tmp0_ = 0x80c5f68
_tmp4_ = 0x0
_original_args_size_ = 1
#14 main (argc=1, argv=0xbffffd54) at rygel-main.c:993
No locals.
(gdb) c
Continuing.
[Thread 0xb75e1b70 (LWP 2335) exited]

Program terminated with signal SIGABRT, Aborted.
The program no longer exists.
(gdb) q


_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/14 Robin Bühler <>:
> I hope i've done it right.

Yes, you did! Thanks so much. Seems like we are not *gracefully*
handling inexistance of session bus. :( If its not too much to ask,
could you please file a bug about this, so that we don't easily forget
about this?

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

> If its not too much to ask,
> could you please file a bug about this, so that we don't easily forget
> about this?

absolutely not :-)

https://bugzilla.gnome.org/show_bug.cgi?id=652678



_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/15 Robin Bühler <>:
>> If its not too much to ask,
>> could you please file a bug about this, so that we don't easily forget
>> about this?
>
> absolutely not :-)
>
> https://bugzilla.gnome.org/show_bug.cgi?id=652678

Thanks so much! I'll try to get some time to fix it soon'ish.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

Thanks a lot for the new version 0.11.1.
I've compiled it succesfully (-disable-mpris-plugin
--disable-external-plugin --enable-mediathek-plugin), but it not
running.

The following happen, before I fall back to the prompt:

(rygel:4557): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
configuration from file '/usr/local/etc/rygel.conf'
(rygel:4557): Rygel-DEBUG: rygel-user-config.vala:131: Failed to load
user configuration from file '/root/.config/rygel.conf': File not found
/usr/local/bin/rygel: symbol lookup error: /usr/local/bin/rygel:
undefined symbol: g_dbus_proxy_get_type

many thanks in advance :)

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)

Hello

I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
any opportunity to run rygel on a server without the x windows system
for example on ubuntu server?

Robin

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/13 Robin Bühler <>:
> Hello

Hi,

> I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
> any opportunity to run rygel on a server without the x windows system
> for example on ubuntu server?

Of course, its very much possible.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

2011/6/13 Robin Bühler <>:
> Hi,

Hello,

> That sounds good. I builded rygel 0.10.2 from the tarball and it works
> good on my devices.

Glad to hear.

> There are some messages on the prompt. Can I ignore them?
>
> (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> `G_IS_OBJECT (object)' failed

These ones don't seem like something ignorable. Is it possible to
get a gdb backtrace of that? Make sure to run rygel as:

G_DEBUG=fatal-criticals gdb rygel

and then gdb will treat those warnings like a crash.

> (rygel:1633): Rygel-CRITICAL **: file rygel-dbus-service.c: line 185:
> uncaught error: Error spawning command line `dbus-launch
> --autolaunch=8d2e626f53e17390c1f4564c000005a2 --binary-syntax
> --close-stderr': Failed to execute child process "dbus-launch" (No such
> file or directory) (g-exec-error-quark, 8)

This and other dbus ones can be ignored. You can get rid of most of
them by disable/removing the 'external' and 'mpris' plugins.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124

P.S Please keep rygel mailing-list in CC.
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list


> > There are some messages on the prompt. Can I ignore them?
> >
> > (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> > `G_IS_OBJECT (object)' failed
>
> These ones don't seem like something ignorable. Is it possible to
> get a gdb backtrace of that? Make sure to run rygel as:
>
> G_DEBUG=fatal-criticals gdb rygel
>
> and then gdb will treat those warnings like a crash.

I hope i've done it right.


## 20110613 2341 | G_DEBUG=fatal-criticals gdb rygel ##
GNU gdb (GDB) 7.2-debian
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later

This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show
copying"
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu".
For bug reporting instructions, please see:
...
Reading symbols from /usr/local/bin/rygel...done.
(gdb) r
Starting program: /usr/local/bin/rygel
[Thread debugging using libthread_db enabled]
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
configuration from file '/usr/local/etc/rygel.conf'
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:129: Loaded user
configuration from file '/root/.config/rygel.conf'
[New Thread 0xb75e1b70 (LWP 2335)]

Program received signal SIGABRT, Aborted.
0xb7fe2416 in __kernel_vsyscall ()
(gdb) thread apply all backtrace full

Thread 2 (Thread 0xb75e1b70 (LWP 2335)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb7922f06 in poll () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7a2af5b in g_poll () from /lib/libglib-2.0.so.0
No symbol table info available.
#3 0xb7a1a96f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a1b0f3 in g_main_loop_run () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7bc6274 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#6 0xb7a43b6f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#7 0xb79c3c39 in start_thread () from /lib/i686/cmov/libpthread.so.0
No symbol table info available.
#8 0xb79308ee in clone () from /lib/i686/cmov/libc.so.6
No symbol table info available.

Thread 1 (Thread 0xb77b2750 (LWP 2332)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb788e8f1 in raise () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7891d22 in abort () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#3 0xb7a235e8 in g_logv () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a23622 in g_log () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7a2381d in g_return_if_fail_warning () from /lib/libglib-2.0.so.0
No symbol table info available.
#6 0xb7ad1ea2 in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#7 0xb7bc3bc3 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#8 0xb7ad200c in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#9 0xb7b5a172 in g_initable_new_valist () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#10 0xb7b5a1b9 in g_initable_new () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#11 0x0809a559 in rygel_dbus_service_construct (object_type=135932928,
main=0x80cb2c0,
error=0xbffffc88) at rygel-dbus-service.c:177
self = 0x8167238
_tmp0_ = 0xbffffc0c
_tmp1_ = 0x0
bus =
_tmp2_ =
_tmp3_ =
_inner_error_ = 0x81a2fa0
__PRETTY_FUNCTION__ = "rygel_dbus_service_construct"
#12 0x0809ab20 in rygel_dbus_service_new (main=0x80cb2c0,
error=0xbffffc88)
at rygel-dbus-service.c:254
No locals.
#13 0x0805a91c in rygel_main_main (argc=1, argv=0xbffffd54) at
rygel-main.c:920
result = 0
main =
_tmp2_ =
exit_code =
_tmp1_ = 0xbffffd54
original_args_length1 = 1
_inner_error_ = 0x0
original_args = 0x80c5f68
_tmp5_ =
_tmp0_ = 0x80c5f68
_tmp4_ = 0x0
_original_args_size_ = 1
#14 main (argc=1, argv=0xbffffd54) at rygel-main.c:993
No locals.
(gdb) c
Continuing.
[Thread 0xb75e1b70 (LWP 2335) exited]

Program terminated with signal SIGABRT, Aborted.
The program no longer exists.
(gdb) q


_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/14 Robin Bühler <>:
> I hope i've done it right.

Yes, you did! Thanks so much. Seems like we are not *gracefully*
handling inexistance of session bus. :( If its not too much to ask,
could you please file a bug about this, so that we don't easily forget
about this?

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

> If its not too much to ask,
> could you please file a bug about this, so that we don't easily forget
> about this?

absolutely not :-)

https://bugzilla.gnome.org/show_bug.cgi?id=652678



_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/15 Robin Bühler <>:
>> If its not too much to ask,
>> could you please file a bug about this, so that we don't easily forget
>> about this?
>
> absolutely not :-)
>
> https://bugzilla.gnome.org/show_bug.cgi?id=652678

Thanks so much! I'll try to get some time to fix it soon'ish.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

Thanks a lot for the new version 0.11.1.
I've compiled it succesfully (-disable-mpris-plugin
--disable-external-plugin --enable-mediathek-plugin), but it not
running.

The following happen, before I fall back to the prompt:

(rygel:4557): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
configuration from file '/usr/local/etc/rygel.conf'
(rygel:4557): Rygel-DEBUG: rygel-user-config.vala:131: Failed to load
user configuration from file '/root/.config/rygel.conf': File not found
/usr/local/bin/rygel: symbol lookup error: /usr/local/bin/rygel:
undefined symbol: g_dbus_proxy_get_type

many thanks in advance :)

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
On Mi, 2011-06-22 at 21:48 +0200, Robin Bühler wrote:
> Thanks a lot for the new version 0.11.1.
> I've compiled it succesfully (-disable-mpris-plugin
> --disable-external-plugin --enable-mediathek-plugin), but it not
Mediathek? Is the ZDF that popular in Switzerland?

> (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
> configuration from file '/usr/local/etc/rygel.conf'
> (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:131: Failed to load
> user configuration from file '/root/.config/rygel.conf': File not found
> /usr/local/bin/rygel: symbol lookup error: /usr/local/bin/rygel:
> undefined symbol: g_dbus_proxy_get_type

That looks like there's an issue with the glib you compiled against (a
version containing GDBus) and the one you're running against (a version
not containing GDBus). You should check with ldd if the libgio it links
against is the right one.


_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

Hello

I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
any opportunity to run rygel on a server without the x windows system
for example on ubuntu server?

Robin

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/13 Robin Bühler <>:
> Hello

Hi,

> I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
> any opportunity to run rygel on a server without the x windows system
> for example on ubuntu server?

Of course, its very much possible.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

2011/6/13 Robin Bühler <>:
> Hi,

Hello,

> That sounds good. I builded rygel 0.10.2 from the tarball and it works
> good on my devices.

Glad to hear.

> There are some messages on the prompt. Can I ignore them?
>
> (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> `G_IS_OBJECT (object)' failed

These ones don't seem like something ignorable. Is it possible to
get a gdb backtrace of that? Make sure to run rygel as:

G_DEBUG=fatal-criticals gdb rygel

and then gdb will treat those warnings like a crash.

> (rygel:1633): Rygel-CRITICAL **: file rygel-dbus-service.c: line 185:
> uncaught error: Error spawning command line `dbus-launch
> --autolaunch=8d2e626f53e17390c1f4564c000005a2 --binary-syntax
> --close-stderr': Failed to execute child process "dbus-launch" (No such
> file or directory) (g-exec-error-quark, 8)

This and other dbus ones can be ignored. You can get rid of most of
them by disable/removing the 'external' and 'mpris' plugins.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124

P.S Please keep rygel mailing-list in CC.
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list


> > There are some messages on the prompt. Can I ignore them?
> >
> > (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> > `G_IS_OBJECT (object)' failed
>
> These ones don't seem like something ignorable. Is it possible to
> get a gdb backtrace of that? Make sure to run rygel as:
>
> G_DEBUG=fatal-criticals gdb rygel
>
> and then gdb will treat those warnings like a crash.

I hope i've done it right.


## 20110613 2341 | G_DEBUG=fatal-criticals gdb rygel ##
GNU gdb (GDB) 7.2-debian
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later

This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show
copying"
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu".
For bug reporting instructions, please see:
...
Reading symbols from /usr/local/bin/rygel...done.
(gdb) r
Starting program: /usr/local/bin/rygel
[Thread debugging using libthread_db enabled]
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
configuration from file '/usr/local/etc/rygel.conf'
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:129: Loaded user
configuration from file '/root/.config/rygel.conf'
[New Thread 0xb75e1b70 (LWP 2335)]

Program received signal SIGABRT, Aborted.
0xb7fe2416 in __kernel_vsyscall ()
(gdb) thread apply all backtrace full

Thread 2 (Thread 0xb75e1b70 (LWP 2335)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb7922f06 in poll () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7a2af5b in g_poll () from /lib/libglib-2.0.so.0
No symbol table info available.
#3 0xb7a1a96f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a1b0f3 in g_main_loop_run () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7bc6274 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#6 0xb7a43b6f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#7 0xb79c3c39 in start_thread () from /lib/i686/cmov/libpthread.so.0
No symbol table info available.
#8 0xb79308ee in clone () from /lib/i686/cmov/libc.so.6
No symbol table info available.

Thread 1 (Thread 0xb77b2750 (LWP 2332)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb788e8f1 in raise () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7891d22 in abort () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#3 0xb7a235e8 in g_logv () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a23622 in g_log () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7a2381d in g_return_if_fail_warning () from /lib/libglib-2.0.so.0
No symbol table info available.
#6 0xb7ad1ea2 in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#7 0xb7bc3bc3 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#8 0xb7ad200c in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#9 0xb7b5a172 in g_initable_new_valist () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#10 0xb7b5a1b9 in g_initable_new () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#11 0x0809a559 in rygel_dbus_service_construct (object_type=135932928,
main=0x80cb2c0,
error=0xbffffc88) at rygel-dbus-service.c:177
self = 0x8167238
_tmp0_ = 0xbffffc0c
_tmp1_ = 0x0
bus =
_tmp2_ =
_tmp3_ =
_inner_error_ = 0x81a2fa0
__PRETTY_FUNCTION__ = "rygel_dbus_service_construct"
#12 0x0809ab20 in rygel_dbus_service_new (main=0x80cb2c0,
error=0xbffffc88)
at rygel-dbus-service.c:254
No locals.
#13 0x0805a91c in rygel_main_main (argc=1, argv=0xbffffd54) at
rygel-main.c:920
result = 0
main =
_tmp2_ =
exit_code =
_tmp1_ = 0xbffffd54
original_args_length1 = 1
_inner_error_ = 0x0
original_args = 0x80c5f68
_tmp5_ =
_tmp0_ = 0x80c5f68
_tmp4_ = 0x0
_original_args_size_ = 1
#14 main (argc=1, argv=0xbffffd54) at rygel-main.c:993
No locals.
(gdb) c
Continuing.
[Thread 0xb75e1b70 (LWP 2335) exited]

Program terminated with signal SIGABRT, Aborted.
The program no longer exists.
(gdb) q


_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/14 Robin Bühler <>:
> I hope i've done it right.

Yes, you did! Thanks so much. Seems like we are not *gracefully*
handling inexistance of session bus. :( If its not too much to ask,
could you please file a bug about this, so that we don't easily forget
about this?

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

> If its not too much to ask,
> could you please file a bug about this, so that we don't easily forget
> about this?

absolutely not :-)

https://bugzilla.gnome.org/show_bug.cgi?id=652678



_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/15 Robin Bühler <>:
>> If its not too much to ask,
>> could you please file a bug about this, so that we don't easily forget
>> about this?
>
> absolutely not :-)
>
> https://bugzilla.gnome.org/show_bug.cgi?id=652678

Thanks so much! I'll try to get some time to fix it soon'ish.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

Thanks a lot for the new version 0.11.1.
I've compiled it succesfully (-disable-mpris-plugin
--disable-external-plugin --enable-mediathek-plugin), but it not
running.

The following happen, before I fall back to the prompt:

(rygel:4557): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
configuration from file '/usr/local/etc/rygel.conf'
(rygel:4557): Rygel-DEBUG: rygel-user-config.vala:131: Failed to load
user configuration from file '/root/.config/rygel.conf': File not found
/usr/local/bin/rygel: symbol lookup error: /usr/local/bin/rygel:
undefined symbol: g_dbus_proxy_get_type

many thanks in advance :)

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
On Mi, 2011-06-22 at 21:48 +0200, Robin Bühler wrote:
> Thanks a lot for the new version 0.11.1.
> I've compiled it succesfully (-disable-mpris-plugin
> --disable-external-plugin --enable-mediathek-plugin), but it not
Mediathek? Is the ZDF that popular in Switzerland?

> (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
> configuration from file '/usr/local/etc/rygel.conf'
> (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:131: Failed to load
> user configuration from file '/root/.config/rygel.conf': File not found
> /usr/local/bin/rygel: symbol lookup error: /usr/local/bin/rygel:
> undefined symbol: g_dbus_proxy_get_type

That looks like there's an issue with the glib you compiled against (a
version containing GDBus) and the one you're running against (a version
not containing GDBus). You should check with ldd if the libgio it links
against is the right one.


_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

On Wed, Jun 22, 2011 at 11:00 PM, Jens Georg <> wrote:
> On Mi, 2011-06-22 at 21:48 +0200, Robin Bühler wrote:
>> Thanks a lot for the new version 0.11.1.
>> I've compiled it succesfully (-disable-mpris-plugin
>> --disable-external-plugin --enable-mediathek-plugin), but it not
> Mediathek? Is the ZDF that popular in Switzerland?
>
>> (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
>> configuration from file '/usr/local/etc/rygel.conf'
>> (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:131: Failed to load
>> user configuration from file '/root/.config/rygel.conf': File not found
>> /usr/local/bin/rygel: symbol lookup error: /usr/local/bin/rygel:
>> undefined symbol: g_dbus_proxy_get_type
>
> That looks like there's an issue with the glib you compiled against (a
> version containing GDBus) and the one you're running against (a version
> not containing GDBus). You should check with ldd if the libgio it links
> against is the right one.

Also maybe we should explicitly check for and link against gdbus?

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

Hello

I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
any opportunity to run rygel on a server without the x windows system
for example on ubuntu server?

Robin

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/13 Robin Bühler <>:
> Hello

Hi,

> I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
> any opportunity to run rygel on a server without the x windows system
> for example on ubuntu server?

Of course, its very much possible.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

2011/6/13 Robin Bühler <>:
> Hi,

Hello,

> That sounds good. I builded rygel 0.10.2 from the tarball and it works
> good on my devices.

Glad to hear.

> There are some messages on the prompt. Can I ignore them?
>
> (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> `G_IS_OBJECT (object)' failed

These ones don't seem like something ignorable. Is it possible to
get a gdb backtrace of that? Make sure to run rygel as:

G_DEBUG=fatal-criticals gdb rygel

and then gdb will treat those warnings like a crash.

> (rygel:1633): Rygel-CRITICAL **: file rygel-dbus-service.c: line 185:
> uncaught error: Error spawning command line `dbus-launch
> --autolaunch=8d2e626f53e17390c1f4564c000005a2 --binary-syntax
> --close-stderr': Failed to execute child process "dbus-launch" (No such
> file or directory) (g-exec-error-quark, 8)

This and other dbus ones can be ignored. You can get rid of most of
them by disable/removing the 'external' and 'mpris' plugins.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124

P.S Please keep rygel mailing-list in CC.
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list


> > There are some messages on the prompt. Can I ignore them?
> >
> > (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> > `G_IS_OBJECT (object)' failed
>
> These ones don't seem like something ignorable. Is it possible to
> get a gdb backtrace of that? Make sure to run rygel as:
>
> G_DEBUG=fatal-criticals gdb rygel
>
> and then gdb will treat those warnings like a crash.

I hope i've done it right.


## 20110613 2341 | G_DEBUG=fatal-criticals gdb rygel ##
GNU gdb (GDB) 7.2-debian
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later

This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show
copying"
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu".
For bug reporting instructions, please see:
...
Reading symbols from /usr/local/bin/rygel...done.
(gdb) r
Starting program: /usr/local/bin/rygel
[Thread debugging using libthread_db enabled]
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
configuration from file '/usr/local/etc/rygel.conf'
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:129: Loaded user
configuration from file '/root/.config/rygel.conf'
[New Thread 0xb75e1b70 (LWP 2335)]

Program received signal SIGABRT, Aborted.
0xb7fe2416 in __kernel_vsyscall ()
(gdb) thread apply all backtrace full

Thread 2 (Thread 0xb75e1b70 (LWP 2335)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb7922f06 in poll () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7a2af5b in g_poll () from /lib/libglib-2.0.so.0
No symbol table info available.
#3 0xb7a1a96f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a1b0f3 in g_main_loop_run () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7bc6274 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#6 0xb7a43b6f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#7 0xb79c3c39 in start_thread () from /lib/i686/cmov/libpthread.so.0
No symbol table info available.
#8 0xb79308ee in clone () from /lib/i686/cmov/libc.so.6
No symbol table info available.

Thread 1 (Thread 0xb77b2750 (LWP 2332)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb788e8f1 in raise () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7891d22 in abort () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#3 0xb7a235e8 in g_logv () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a23622 in g_log () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7a2381d in g_return_if_fail_warning () from /lib/libglib-2.0.so.0
No symbol table info available.
#6 0xb7ad1ea2 in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#7 0xb7bc3bc3 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#8 0xb7ad200c in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#9 0xb7b5a172 in g_initable_new_valist () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#10 0xb7b5a1b9 in g_initable_new () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#11 0x0809a559 in rygel_dbus_service_construct (object_type=135932928,
main=0x80cb2c0,
error=0xbffffc88) at rygel-dbus-service.c:177
self = 0x8167238
_tmp0_ = 0xbffffc0c
_tmp1_ = 0x0
bus =
_tmp2_ =
_tmp3_ =
_inner_error_ = 0x81a2fa0
__PRETTY_FUNCTION__ = "rygel_dbus_service_construct"
#12 0x0809ab20 in rygel_dbus_service_new (main=0x80cb2c0,
error=0xbffffc88)
at rygel-dbus-service.c:254
No locals.
#13 0x0805a91c in rygel_main_main (argc=1, argv=0xbffffd54) at
rygel-main.c:920
result = 0
main =
_tmp2_ =
exit_code =
_tmp1_ = 0xbffffd54
original_args_length1 = 1
_inner_error_ = 0x0
original_args = 0x80c5f68
_tmp5_ =
_tmp0_ = 0x80c5f68
_tmp4_ = 0x0
_original_args_size_ = 1
#14 main (argc=1, argv=0xbffffd54) at rygel-main.c:993
No locals.
(gdb) c
Continuing.
[Thread 0xb75e1b70 (LWP 2335) exited]

Program terminated with signal SIGABRT, Aborted.
The program no longer exists.
(gdb) q


_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/14 Robin Bühler <>:
> I hope i've done it right.

Yes, you did! Thanks so much. Seems like we are not *gracefully*
handling inexistance of session bus. :( If its not too much to ask,
could you please file a bug about this, so that we don't easily forget
about this?

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

> If its not too much to ask,
> could you please file a bug about this, so that we don't easily forget
> about this?

absolutely not :-)

https://bugzilla.gnome.org/show_bug.cgi?id=652678



_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/15 Robin Bühler <>:
>> If its not too much to ask,
>> could you please file a bug about this, so that we don't easily forget
>> about this?
>
> absolutely not :-)
>
> https://bugzilla.gnome.org/show_bug.cgi?id=652678

Thanks so much! I'll try to get some time to fix it soon'ish.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

Thanks a lot for the new version 0.11.1.
I've compiled it succesfully (-disable-mpris-plugin
--disable-external-plugin --enable-mediathek-plugin), but it not
running.

The following happen, before I fall back to the prompt:

(rygel:4557): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
configuration from file '/usr/local/etc/rygel.conf'
(rygel:4557): Rygel-DEBUG: rygel-user-config.vala:131: Failed to load
user configuration from file '/root/.config/rygel.conf': File not found
/usr/local/bin/rygel: symbol lookup error: /usr/local/bin/rygel:
undefined symbol: g_dbus_proxy_get_type

many thanks in advance :)

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
On Mi, 2011-06-22 at 21:48 +0200, Robin Bühler wrote:
> Thanks a lot for the new version 0.11.1.
> I've compiled it succesfully (-disable-mpris-plugin
> --disable-external-plugin --enable-mediathek-plugin), but it not
Mediathek? Is the ZDF that popular in Switzerland?

> (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
> configuration from file '/usr/local/etc/rygel.conf'
> (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:131: Failed to load
> user configuration from file '/root/.config/rygel.conf': File not found
> /usr/local/bin/rygel: symbol lookup error: /usr/local/bin/rygel:
> undefined symbol: g_dbus_proxy_get_type

That looks like there's an issue with the glib you compiled against (a
version containing GDBus) and the one you're running against (a version
not containing GDBus). You should check with ldd if the libgio it links
against is the right one.


_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

On Wed, Jun 22, 2011 at 11:00 PM, Jens Georg <> wrote:
> On Mi, 2011-06-22 at 21:48 +0200, Robin Bühler wrote:
>> Thanks a lot for the new version 0.11.1.
>> I've compiled it succesfully (-disable-mpris-plugin
>> --disable-external-plugin --enable-mediathek-plugin), but it not
> Mediathek? Is the ZDF that popular in Switzerland?
>
>> (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
>> configuration from file '/usr/local/etc/rygel.conf'
>> (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:131: Failed to load
>> user configuration from file '/root/.config/rygel.conf': File not found
>> /usr/local/bin/rygel: symbol lookup error: /usr/local/bin/rygel:
>> undefined symbol: g_dbus_proxy_get_type
>
> That looks like there's an issue with the glib you compiled against (a
> version containing GDBus) and the one you're running against (a version
> not containing GDBus). You should check with ldd if the libgio it links
> against is the right one.

Also maybe we should explicitly check for and link against gdbus?

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

On Mi, 2011-06-22 at 23:17 +0300, Zeeshan Ali (Khattak) wrote:

> > That looks like there's an issue with the glib you compiled against (a
> > version containing GDBus) and the one you're running against (a version
> > not containing GDBus). You should check with ldd if the libgio it links
> > against is the right one.
>
> Also maybe we should explicitly check for and link against gdbus?

There's no explicit GDBus. GDBus is part of GIO.

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)

Hello

I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
any opportunity to run rygel on a server without the x windows system
for example on ubuntu server?

Robin

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/13 Robin Bühler <>:
> Hello

Hi,

> I'm writing an blog article about UPnP AV, so i've Rygel found. Is there
> any opportunity to run rygel on a server without the x windows system
> for example on ubuntu server?

Of course, its very much possible.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

2011/6/13 Robin Bühler <>:
> Hi,

Hello,

> That sounds good. I builded rygel 0.10.2 from the tarball and it works
> good on my devices.

Glad to hear.

> There are some messages on the prompt. Can I ignore them?
>
> (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> `G_IS_OBJECT (object)' failed

These ones don't seem like something ignorable. Is it possible to
get a gdb backtrace of that? Make sure to run rygel as:

G_DEBUG=fatal-criticals gdb rygel

and then gdb will treat those warnings like a crash.

> (rygel:1633): Rygel-CRITICAL **: file rygel-dbus-service.c: line 185:
> uncaught error: Error spawning command line `dbus-launch
> --autolaunch=8d2e626f53e17390c1f4564c000005a2 --binary-syntax
> --close-stderr': Failed to execute child process "dbus-launch" (No such
> file or directory) (g-exec-error-quark, 8)

This and other dbus ones can be ignored. You can get rid of most of
them by disable/removing the 'external' and 'mpris' plugins.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124

P.S Please keep rygel mailing-list in CC.
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list


> > There are some messages on the prompt. Can I ignore them?
> >
> > (rygel:1633): GLib-GObject-CRITICAL **: g_object_unref: assertion
> > `G_IS_OBJECT (object)' failed
>
> These ones don't seem like something ignorable. Is it possible to
> get a gdb backtrace of that? Make sure to run rygel as:
>
> G_DEBUG=fatal-criticals gdb rygel
>
> and then gdb will treat those warnings like a crash.

I hope i've done it right.


## 20110613 2341 | G_DEBUG=fatal-criticals gdb rygel ##
GNU gdb (GDB) 7.2-debian
Copyright (C) 2010 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later

This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show
copying"
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu".
For bug reporting instructions, please see:
...
Reading symbols from /usr/local/bin/rygel...done.
(gdb) r
Starting program: /usr/local/bin/rygel
[Thread debugging using libthread_db enabled]
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
configuration from file '/usr/local/etc/rygel.conf'
(rygel:2332): Rygel-DEBUG: rygel-user-config.vala:129: Loaded user
configuration from file '/root/.config/rygel.conf'
[New Thread 0xb75e1b70 (LWP 2335)]

Program received signal SIGABRT, Aborted.
0xb7fe2416 in __kernel_vsyscall ()
(gdb) thread apply all backtrace full

Thread 2 (Thread 0xb75e1b70 (LWP 2335)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb7922f06 in poll () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7a2af5b in g_poll () from /lib/libglib-2.0.so.0
No symbol table info available.
#3 0xb7a1a96f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a1b0f3 in g_main_loop_run () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7bc6274 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#6 0xb7a43b6f in ?? () from /lib/libglib-2.0.so.0
No symbol table info available.
#7 0xb79c3c39 in start_thread () from /lib/i686/cmov/libpthread.so.0
No symbol table info available.
#8 0xb79308ee in clone () from /lib/i686/cmov/libc.so.6
No symbol table info available.

Thread 1 (Thread 0xb77b2750 (LWP 2332)):
#0 0xb7fe2416 in __kernel_vsyscall ()
No symbol table info available.
#1 0xb788e8f1 in raise () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#2 0xb7891d22 in abort () from /lib/i686/cmov/libc.so.6
No symbol table info available.
#3 0xb7a235e8 in g_logv () from /lib/libglib-2.0.so.0
No symbol table info available.
#4 0xb7a23622 in g_log () from /lib/libglib-2.0.so.0
No symbol table info available.
#5 0xb7a2381d in g_return_if_fail_warning () from /lib/libglib-2.0.so.0
No symbol table info available.
#6 0xb7ad1ea2 in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#7 0xb7bc3bc3 in ?? () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#8 0xb7ad200c in g_object_unref () from /usr/lib/libgobject-2.0.so.0
No symbol table info available.
#9 0xb7b5a172 in g_initable_new_valist () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#10 0xb7b5a1b9 in g_initable_new () from /usr/lib/libgio-2.0.so.0
No symbol table info available.
#11 0x0809a559 in rygel_dbus_service_construct (object_type=135932928,
main=0x80cb2c0,
error=0xbffffc88) at rygel-dbus-service.c:177
self = 0x8167238
_tmp0_ = 0xbffffc0c
_tmp1_ = 0x0
bus =
_tmp2_ =
_tmp3_ =
_inner_error_ = 0x81a2fa0
__PRETTY_FUNCTION__ = "rygel_dbus_service_construct"
#12 0x0809ab20 in rygel_dbus_service_new (main=0x80cb2c0,
error=0xbffffc88)
at rygel-dbus-service.c:254
No locals.
#13 0x0805a91c in rygel_main_main (argc=1, argv=0xbffffd54) at
rygel-main.c:920
result = 0
main =
_tmp2_ =
exit_code =
_tmp1_ = 0xbffffd54
original_args_length1 = 1
_inner_error_ = 0x0
original_args = 0x80c5f68
_tmp5_ =
_tmp0_ = 0x80c5f68
_tmp4_ = 0x0
_original_args_size_ = 1
#14 main (argc=1, argv=0xbffffd54) at rygel-main.c:993
No locals.
(gdb) c
Continuing.
[Thread 0xb75e1b70 (LWP 2335) exited]

Program terminated with signal SIGABRT, Aborted.
The program no longer exists.
(gdb) q


_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/14 Robin Bühler <>:
> I hope i've done it right.

Yes, you did! Thanks so much. Seems like we are not *gracefully*
handling inexistance of session bus. :( If its not too much to ask,
could you please file a bug about this, so that we don't easily forget
about this?

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

> If its not too much to ask,
> could you please file a bug about this, so that we don't easily forget
> about this?

absolutely not :-)

https://bugzilla.gnome.org/show_bug.cgi?id=652678



_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
2011/6/15 Robin Bühler <>:
>> If its not too much to ask,
>> could you please file a bug about this, so that we don't easily forget
>> about this?
>
> absolutely not :-)
>
> https://bugzilla.gnome.org/show_bug.cgi?id=652678

Thanks so much! I'll try to get some time to fix it soon'ish.

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

Thanks a lot for the new version 0.11.1.
I've compiled it succesfully (-disable-mpris-plugin
--disable-external-plugin --enable-mediathek-plugin), but it not
running.

The following happen, before I fall back to the prompt:

(rygel:4557): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
configuration from file '/usr/local/etc/rygel.conf'
(rygel:4557): Rygel-DEBUG: rygel-user-config.vala:131: Failed to load
user configuration from file '/root/.config/rygel.conf': File not found
/usr/local/bin/rygel: symbol lookup error: /usr/local/bin/rygel:
undefined symbol: g_dbus_proxy_get_type

many thanks in advance :)

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
On Mi, 2011-06-22 at 21:48 +0200, Robin Bühler wrote:
> Thanks a lot for the new version 0.11.1.
> I've compiled it succesfully (-disable-mpris-plugin
> --disable-external-plugin --enable-mediathek-plugin), but it not
Mediathek? Is the ZDF that popular in Switzerland?

> (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
> configuration from file '/usr/local/etc/rygel.conf'
> (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:131: Failed to load
> user configuration from file '/root/.config/rygel.conf': File not found
> /usr/local/bin/rygel: symbol lookup error: /usr/local/bin/rygel:
> undefined symbol: g_dbus_proxy_get_type

That looks like there's an issue with the glib you compiled against (a
version containing GDBus) and the one you're running against (a version
not containing GDBus). You should check with ldd if the libgio it links
against is the right one.


_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

On Wed, Jun 22, 2011 at 11:00 PM, Jens Georg <> wrote:
> On Mi, 2011-06-22 at 21:48 +0200, Robin Bühler wrote:
>> Thanks a lot for the new version 0.11.1.
>> I've compiled it succesfully (-disable-mpris-plugin
>> --disable-external-plugin --enable-mediathek-plugin), but it not
> Mediathek? Is the ZDF that popular in Switzerland?
>
>> (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
>> configuration from file '/usr/local/etc/rygel.conf'
>> (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:131: Failed to load
>> user configuration from file '/root/.config/rygel.conf': File not found
>> /usr/local/bin/rygel: symbol lookup error: /usr/local/bin/rygel:
>> undefined symbol: g_dbus_proxy_get_type
>
> That looks like there's an issue with the glib you compiled against (a
> version containing GDBus) and the one you're running against (a version
> not containing GDBus). You should check with ldd if the libgio it links
> against is the right one.

Also maybe we should explicitly check for and link against gdbus?

--
Regards,

Zeeshan Ali (Khattak)
FSF member#5124
_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list

On Mi, 2011-06-22 at 23:17 +0300, Zeeshan Ali (Khattak) wrote:

> > That looks like there's an issue with the glib you compiled against (a
> > version containing GDBus) and the one you're running against (a version
> > not containing GDBus). You should check with ldd if the libgio it links
> > against is the right one.
>
> Also maybe we should explicitly check for and link against gdbus?

There's no explicit GDBus. GDBus is part of GIO.

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)
> Mediathek? Is the ZDF that popular in Switzerland?

There are some interesting documentaries on ZDF. :-) (Terra X, ..) ZDF
can be received via cable almost everywhere in Switzerland.

> > (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:119: Loaded system
> > configuration from file '/usr/local/etc/rygel.conf'
> > (rygel:4557): Rygel-DEBUG: rygel-user-config.vala:131: Failed to load
> > user configuration from file '/root/.config/rygel.conf': File not found
> > /usr/local/bin/rygel: symbol lookup error: /usr/local/bin/rygel:
> > undefined symbol: g_dbus_proxy_get_type
>
> That looks like there's an issue with the glib you compiled against (a
> version containing GDBus) and the one you're running against (a version
> not containing GDBus). You should check with ldd if the libgio it links
> against is the right one.

Sorry, libglib2.0 was not correctly linked.

A known critical error will still shown, but it works so far :-)

(rygel:3400): GLib-GObject-CRITICAL **: g_object_unref: assertion
`G_IS_OBJECT (object)' failed

(rygel:3400): Rygel-WARNING **: Failed to start D-Bus service: Command
line `dbus-launch --autolaunch=c6b519d567089e390c523a30000000bf
--binary-syntax --close-stderr' exited with non-zero exit status 1:
Autolaunch error: X11 initialization failed.\n
Rygel-Message: New plugin 'Playbin' available

(rygel:3400): GLib-GObject-CRITICAL **: g_object_unref: assertion
`G_IS_OBJECT (object)' failed

Thank you for your support!

_______________________________________________
rygel-list mailing list
rygel-
http://mail.gnome.org/mailman/listinfo/rygel-list
)